You are here: Products > Unified Threat Management > Using Smoothwall Hardware > Installing as a Basic Web Proxy
Installing as a Basic Web Proxy
Note: This topic applies to the Leeds Release.
This is the simplest scenario. The appliance is deployed using only one interface plugged into the network. Typically, this is used in a Secure Web Gateway installation.
To configure a basic installation, do the following:
1. | Place the appliance in a stable and secure location. |
2. | Connect an Ethernet cable from port 1 to your network; the other ports are not used. |
For example:
3. | Using the supplied AC power cord, connect the appliance to the power supply. |
The appliance boots.
If the appliance does not power on and boot automatically, use the power switch on the back panel; for S10 appliances, hold down the key on the keypad for one second to power on the S10 appliance.
For a detailed description of how to register your appliance, see Accessing the Smoothwall .