Note: This topic applies to the Edinburgh Release.
Note: A Unified Threat Management serial is required to configure VPNs. For more information, contact your Smoothwall representative.
You must set the default local certificate on each Smoothwall System host. The default local certificate should be the certificate that identifies its host.
|1.||Go to Network > VPN > Global.|
|2.||In the Default local certificate panel, select the host’s certificate from the Certificate drop-down list.|
|3.||Click Save. This certificate will now be used by default in all future tunnel specifications, unless otherwise specified.|
|4.||When prompted by the Smoothwall System, click Restart to deploy the certificate.|
In some instances, it may be desirable to install multiple local certificates that are used to identify the same host. There are a number of situations, where this might be desirable:
|||Autonomous management of roadwarrior tunnels from multiple sites.|
|||Autonomous management of site-to-site tunnels from multiple sites.|
Multiple local certificates are typically used to de-centralize VPN management in larger networks. For instance, a VPN could be used to create a WAN (Wide Area Network) between three head offices of an multinational company. Each head office must be responsible for its own VPN links that connect its regional branches to its head office, as otherwise there would be a reliance on a single set of administrators in one country / time zone preparing certificates for the entire organization.
Using the above example, each head office VPN gateway could utilize two local IDs (certificates):
|||Country head office ID – This ID would be used by a head office to identify itself to head offices from other countries, to form VPN tunnels that make up the international WAN.|
|||Head office ID – This ID would be used by a head office to identify itself to other domestic offices, so that it can manage VPN tunnel connectivity within its own region.|
The same concept can be applied to any situation where autonomous VPN management is required. To continue the above example, many of the offices within one particular country require a number of roadwarrior users to connect to their local networks. In this instance, a branch office VPN gateway could utilize two local IDs (certificates):
|||Regional branch office ID – This ID would be used by a branch office to identify itself to the head office and other branch offices that make up the country-wide WAN.|
|||Branch office ID – This ID would be used by a branch office to identify itself to its local roadwarriors, so that it can manage roadwarrior connectivity to its own branch.|
This example will demonstrate how to delegate VPN management from an unconfigured master Smoothwall System to an unconfigured secondary Smoothwall System. The secondary Smoothwall System is responsible for managing site-to-site and roadwarrior connections within its own geography.
Firstly, we must create a tunnel to link the master Smoothwall System to the secondary Smoothwall System.
Since this example covers configuration from scratch, you must follow the instructions from the step most appropriate to your current level of VPN connectivity.
|1.||On the master system, go to the Network > VPN > Certificate authorities page.|
|2.||Create a local Certificate Authority, see Creating a Certificate Authority .|
|3.||Create signed certificates for the master and secondary Smoothwall Systems, see Managing Certificates .|
|4.||Install the master signed certificate as the master Smoothwall System's default local certificate, see Setting the Default Local Certificate .|
|5.||Create the tunnel specification to the secondary Smoothwall System, see Creating an IPsec Tunnel.|
|6.||Export the secondary Smoothwall System's signed certificate using the PKCS#12 format, see Exporting Certificates.|
|7.||Export the master Smoothwall System's Certificate Authority certificate in PEM format, see Exporting the Certificate Authority Certificate.|
The remaining series of configuration steps are all carried out on the secondary Smoothwall System, firstly to create the primary site-to-site link.
To create the primary site-to-site link:
|1.||On the secondary system, go to the Network > VPN > Certificate authorities page.|
|2.||Import the Certificate Authority certificate on the secondary Smoothwall System, see Importing Another Certificate Authority's Certificate.|
|3.||Import the signed certificate on the secondary Smoothwall System, see Importing a Certificate.|
|4.||Install the signed certificate as the default local certificate, see Setting the Default Local Certificate .|
|5.||Create the tunnel specification to the master Smoothwall System, with Local certificate set to Default see Creating an IPsec Tunnel.|
|6.||Test the VPN connection.|
The next step is to create an additional Certificate Authority on the secondary Smoothwall System. This additional Certificate Authority is used to create another local certificate for the secondary Smoothwall System, as well as certificates for any further site-to-site or roadwarrior connections that it is responsible for managing.
To create an additional Certificate Authority on the secondary Smoothwall System system:
|1.||On the secondary system, go to the Network > VPN > Certificate authorities page.|
|2.||Create a new local Certificate Authority, see Creating a Certificate Authority .|
|3.||Create a new signed certificate for the secondary Smoothwall System (this is used as the secondary Smoothwall System's second local certificate, see Managing Certificates .|
|4.||Create a new signed certificate for any host whose VPN connectivity is managed by the secondary Smoothwall System.|
|5.||Create a site-to-site or roadwarrior tunnel specification, and choose the second signed certificate (created by the previous step) as the Local certificate.|
|6.||Export the local Certificate Authority and signed certificate created by step 4 to any host whose VPN connectivity is managed by the secondary Smoothwall System.|
|7.||Create the remote tunnel specification (this could be a roadwarrior client or another site-to-site gateway).|
It is possible to authenticate a VPN tunnel by exchanging each host's public key with the other. During authentication, each host uses the other host's public key to decrypt the (private key encrypted) certificate it is passed as identity credentials.
This configuration does not require the Certificate Authority that created either host's certificate to be known to either VPN gateway. This can be useful in many ways:
|||Simplified internal management, using certificates created by an external Certificate Authority.|
|||Tunnelling between two separate organizations using certificates created by different (possibly external) CAs.|
|||Alternative scheme to allow both ends of the tunnel to create their own Certificate Authority and default local certificates. This would enable each VPN gateway to manage their own site-to-site and roadwarrior connections. This achieves the same result as the previous technique described in the Multiple local certificates section.|
Note: The use of public key authentication should not be considered as a direct replacement for a stringent X509 based authentication setup. While public key authentication does use some of the same technologies that constitute an X509 solution, it lacks the ability to validate certificate authenticity. As such, appropriate precautions should be taken when considering implementing this alternative authentication method.
This configuration example uses public key authentication to connect two Smoothwall Systems, each with their own Certificate Authority so that they can manage their own site-to-site and roadwarrior connections.
The following assumptions have been made:
|||Two Smoothwall Systems|
|||Each Smoothwall System has its own Certificate Authority|
|||Each Certificate Authority has created a signed certificate for its own local Smoothwall System|
To create the tunnel specifications:
|1.||On both systems, go to the Network > VPN > Certificates page.|
|2.||Export the local certificates from both the Smoothwall Systems using the PEM format, see Exporting Certificates.|
|3.||Import each PEM certificate on the opposite Smoothwall System, see Importing a Certificate.|
|4.||Create an IPSec site-to-site tunnel specification on the first Smoothwall System, and select the second Smoothwall System’s host certificate in the Authenticate by drop-down list.|
|5.||Create an IPSec site-to-site tunnel specification on the second Smoothwall System, and select the first Smoothwall System’s host certificate in the Authenticate by drop-down list.|
The tunnel can now be established and authenticated between the two Smoothwall Systems. In addition, each Smoothwall System is able to autonomously manage its own site-to-site and roadwarrior connections by using its own Certificate Authority to create additional certificates.